Installing a digital display in your vehicle has never been quicker and easier! Using our product, it's as simple as unscrewing your original instrument cluster and replacing it the same way with our dash mount!
Simply remove your original instrument cluster, bolt-in your mount and wire up your new dash. The surrounding trim piece then screws back in place in front of the mount, leaving the display looking like factory-optioned upgrade,
All dash mounts are made so the digital display sits recessed. This means the screen sits flush with the surface of the dash mount, making it look neat and tidy.
Select your aftermarket display and we'll cut all the mounting holes for you perfectly everytime.
Installing aftermarket gauges, indicator lights, switches, etc. You name it! Let us know and we can add the mounting holes exactly where you want them saving you the time and trouble. Send us an email, live chat with us or call us on the phone so we can make it happen for you. We're here to help.
- Professionally finished in chip resistant 2K paint to remove the 3d printed finish
- Installs in minutes!
- Direct bolt-in install
- No modifications required (except for very large displays mentioned below)
- Made from high strength & heat resistant ABS plastic which can handle up to 105 degrees Celcius! More than the highest temperature your vehicle will experience in the harsh Australian summer.
Most OEM vehicle plastics are also made from ABS plastic. Look on the back of an interior piece, you'll more than likely find it says the three letters we know all too well here at 3DRS, "ABS".
Large digital displays including but not limited to the AiM MXG / Link MXG and AEM CD7/Emtron ED7 may require modification to the dash pad and/or dash shroud to fit and/or see the shift lights.
A portion of the digital screen may be blocked on the AiM MXG / Link MXG, AEM CD7 and Emtron ED7.
DUE TO VERY HIGH DEMAND ON ALL DASH CLUSTERS THERE IS A LEAD TIME FOR THIS PRODUCT TO BE MADE. PLEASE TAKE A LOOK AT THE ESTIMATED LEAD TIME DISPLAYED ON THE BANNER AT THE TOP OF THIS WEB PAGE
If you would like this cluster to be made for a different racing display or a different car (e.g. MoTec, AiM, AEM, etc.) please let us know through the ‘CONTACT US’ page or message us through Facebook: facebook.com/3dracingsolutions/
What does the finished product look like?
All dash clusters are 3D printed using high strength, heat resistant ABS plastic. Most major vehicle manufacturers use this plastic for their own vehicle interiors.
Our products are put through a professional painting process to look OEM, finished in chip resistant 2K paint. The dash cluster in the image below is an example of the paint finish you can expect and may or may not be the specific dash cluster advertised on this page.
Returns, Warranty & Cancellations
For information on returns, warranty, cancellation fees and refunds please visit this page
DIGITAL DISPLAY NOT INCLUDED